daphnissov is there anything else I'd like to try?
↧
Re: Unable power on VM - ESXi 5.5.0
↧
Re: Unable power on VM - ESXi 5.5.0
bluefirestorm is advising to comment out these masks in the VMX file directly by editing it manually. It's worth a shot.
↧
↧
Re: Can't launch vmrc from Firefox - Fedora 27
Hi,
Ok, from what I understood by reading the hacker news response, this feature only lands in Quantum 59, so I guess it will take a bit longer.
--
Wil
↧
Re: Unable power on VM - ESXi 5.5.0
What EVC mode is the cluster configured to use where the host on which this VM resides? Also, attach the latest copy of your VMX file, please.
↧
Re: Unable power on VM - ESXi 5.5.0
daphnissov and bluefirestorm is advising to comment out these masks in the VMX file directly by editing it manually. It's worth a shot.
A: Already made a success for success. The same problem occurred.
↧
↧
Re: Unable power on VM - ESXi 5.5.0
↧
Re: increase esxi datstore
- add an extent to the VMFS datastore – you can add an extent (a partition on a LUN) to any VMFS datastore. You can add up to 32 extents (LUNs) to the datastore, up to 64TB.
- expand the VMFS datastore – you can increase the size of the datastore in its extent. Extents must have free space immediately after them. A LUN can be expanded any number of times, up to 64TB.
The max. LUN size for ESXi/VMFS5 is 64TB.
↧
Re: Unable power on VM - ESXi 5.5.0
In your VMX you have PVSCSI set. Change that back to LSI Logic. Your VM won't be able to boot with the PVSCSI option. Once complete, verify both disks are using LSI Logic and reattach the new VMX (or just cat the file and show output).
↧
Purple screen
Can I get any tips on this purple screen. It appeared last night and the server recovered after a reboot.
↧
↧
Re: download vcenter problem
I can able to see from my account . see below screen shot
contact your Super User as they have complete visibility into the account.
↧
Re: Purple screen
As I can see your esxi build version is very old . try to update latest one .
https://kb.vmware.com/s/article/2143832
ESXi 5.5 Update 1 2014-03-11 1623387.
latest build version
ESXi 5.5 Update 3f 2017-09-14 6480324
Also check your hardware firmware version .
↧
Re: Setup my 1st complete Vcenter with 8 host, need advice. ( 8 host, 2 VC)
anyone can help..please ><
↧
Re: download vcenter problem
my profile home page doesn't have this part!!
↧
↧
Re: ESXi 6.5 with HP DL380 G9 and Raid-Controller P440AR, high latency
What i can also try is to enable caching if battery is disconnected or not fully loaded.
I think so you could not enable the caching . need to check if you configure read and write ratio on raid controller .
Hp support team help you more about it and let you know any changes required .
↧
Re: vSphere 6.5 - NSX Manager 6.3 for antimalware - problem with EAM and host integration
Is it possible that before adding the host to the Cluster the agent VM network property on a host be set
Also a license(NSX or Trendmicro) or compatibility issue may be possible, which version of Deepsecurity is running? For Trendmicro as also may be CPU Socket based, could there be additional license needed for the new hosts?
What does the NSX Manager>Summary>License Information show as the consumed license? Does this exceed the current standard license CPU count?
As adding the additional 2 hosts to the Cluster needs additional CPU license to be consumed and host to be added to the dVS before adding to the NSX Cluster prepared host:
https://thecloudxpert.net/2017/07/howto-add-host-vmware-nsx-enabled-vsphere-cluster/
Prerequisites
This post assumes the following:
- The target VMware ESXi host(s) are already connected to vCenter Server.
- The target VMware ESxi host(s) are already connected to any relevant Distributed Switches.
Deploy a Partner Service
If the partner solution includes a host-resident virtual appliance, you can deploy the service after the solution is registered with NSX Manager.
Prerequisites
Ensure that:
- The partner solution is registered with NSX Manager.
- NSX Manager can access the partner solution's management console.
- The required license edition has been assigned. See https://kb.vmware.com/kb/2145269.
Procedure
- Click Networking & Security and then click Installation.
- Click the Service Deployments tab and click the New Service Deployment (
![Add]()
) icon. - In the Deploy Network and Security Services dialog box, select the appropriate solution(s).
- In Specify schedule (at the bottom of the dialog box), select Deploy now to deploy the solution immediately or select a deployment date and time.
- Click Next.
- Select the datacenter and cluster(s) where you want to deploy the solution and click Next.
- Select the datastore on which to add the solution service virtual machines storage or select Specified on host.The selected datastore must be available on all hosts in the selected cluster.If you selected Specified on host, the datastore for the ESX host must be specified in the AgentVM Settings of the host before it is added to the cluster. See vSphere API/SDK Documentation.
- Select the distributed virtual port group to host the management interface. This port group must be able to reach the NSX Manager’s port group.If the network is set to Specified on host, the network to be used must be specified in the Agent VM Settings > Network property of each host in the cluster. See vSphere API/SDK Documentation.You must set the agent VM network property on a host before you add it to a cluster. Navigate to and click Edit to set the agent VM network.The selected port group must be available on all hosts in the selected cluster.
↧
Re: download vcenter problem
you do not have permission . check with Super User as they have complete visibility into the account or check with Vmware support team for the same
↧
Re: download vcenter problem
i just want to download latest version of vcenter
should i pay any money?
also , who is Super User ? how can i connect whit him/her ?
↧
↧
ESXI Host is discounted
I noticed I could no longer connect to my VM's. I then logged onto my vCenter Server and saw that the ESXI Host was discounted. How did this happen? Did a NIC go bad or something? Both NIC's are blanking green.
This is in a lab environment. The only trouble shooting I've was reboot the ESXI Host. After that I still have this error. I still have 44 days left on my trail period.
↧
Re: ESXI Host is discounted
Can you right click the host and select "connect"?
Also, try right click host "remove from inventory" then add it back in.
↧
Re: ESXI Host is discounted
What happens when you right click the ESXi host in the inventory, and try to reconnect it?
Are you able to logon to the Embedded Host Client on the ESXi host directly?
André
↧